Notes before we begin:
• All information and links used in this help page were derived from DLINK Australia.
• There are two generations (versions) of this modem, please refer to identifying your modem version. |
|
Alternative resources
- DLINK Australia DLINK 504 technical support
Identifying your modem version
DLINK has released two versions of the DSL-504 Modem, you will need to know your version when utilising DLINK DSL-504 firmware and troubleshooting documentation.
- On the front of your modem you will see a logo.
Generation 1 modems |
Generation 2 modems |
|
|
Set-up giudes
- How to upgrade to firmware v.2.0x
- Setup example for Telstra IPoA connection
- Setup example for PPPoE connection
- Setup example for RequestDSL connection
- How to open ports in DSL-504 (firmware 2.21 and above)
- Setup example for Advanced Filtering (firmware 2.21 and above)
- Manuals for DSL-504
Generation 1 firmware
- Firmware ver.R2.02B2AU for DSL-504 (Australia)
- Firmware ver. R2.02B2NZ for DSL-504 (New Zealand)
- Firmware ver.R2.21B13 for DSL-504 (AU & NZ)
Revision info: MSN Messenger 6 fix
Note: Please follow the instructions in the READ_ME file *** NOTE *** You need to have 2.02 or higher before upgrading to 2.21 Older versions of firmware require step-by-step upgrade: R1.14 -> R2.01b2 -> R2.02B2T8 -> R2.21 See DETAILS HERE
Generation 2 firmware
- Firmware ver.R2.21B13 for DSL-504 Generation II Routers (AU & NZ)
Related support pages
- Troubleshooting ADSL connection for DLINK DSL-300, DSL-300+, DSL-500 and DSL-504.
|
